Understanding Yarn Twist: Z-Twist vs S-Twist

Look closely at almost any yarn and you'll see the fibres spiralling around each other in a gentle diagonal. That spiral is twist, and it's what turns a loose cloud of fibre into a strand strong enough to knit, crochet or weave with.
Twist is one of those yarn details most makers never think about, until their yarn starts splitting on the hook, their stocking stitch slants to one side or a skein kinks up on itself. Understanding which way a yarn is twisted, and how much, can explain a surprising number of those small frustrations. Here's what S-twist and Z-twist mean, how to tell them apart and why it matters for your making.
What Is Yarn Twist?
Fibres on their own don't hold together for long. When they're spun, they're twisted around each other, and that twist creates friction that locks them into a continuous strand. The more twist, the more firmly the fibres are held.
Twist can be added in one of two directions, clockwise or anticlockwise, and those two directions are what we call Z-twist and S-twist.
S-Twist vs Z-Twist: How to Tell the Difference
The names come from the shape of the letters themselves.
Hold a length of yarn vertically and look at the angle of the twist:
S-twist: the spiral slants from top left to bottom right, matching the middle stroke of the letter S. This is anticlockwise twist.
Z-twist: the spiral slants from top right to bottom left, matching the middle stroke of the letter Z. This is clockwise twist.
That's all there is to it. Once you've seen it, you'll start noticing twist direction in yarn, string, rope and even the cord on your tea bag.
Singles, Plied Yarn and Why Twist Direction Changes
How twist works in a finished yarn depends on whether it's a single strand or several strands plied together.

A singles yarn (also called single-ply or single-spun) is one strand of spun fibre. It has twist in only one direction.
A plied yarn is made by spinning two or more singles, then twisting those singles together. Plying is almost always done in the opposite direction to the original spin. This balances the energy in the yarn, so the twist of the singles and the twist of the ply cancel each other out and the yarn hangs relaxed rather than curling back on itself. A yarn in this state is called a balanced yarn.
Most commercial knitting yarns are spun Z and plied S. So when you look at a typical plied yarn on the shelf, the twist you can see on the outside is an S-twist. If you gently untwist one of the plies, you'll find the singles inside are Z-twisted.
Some yarns take this a step further. A cabled yarn is made by plying plied yarns together again, with each new twist going in the opposite direction to the last. This creates a round, very stable yarn with crisp stitch definition.
It's worth saying that singles and plied yarns are simply different constructions, each with its own character. A singles yarn often has a soft, lofty hand and a lovely smooth surface, and it's every bit as much a quality yarn as a plied one. It just behaves a little differently, which we'll come to.
Twist Direction in Crochet: Why Does My Yarn Split?
This is where twist direction comes up most often, and it's a common question at our markets: why does my yarn keep splitting when I crochet?

Every time you wrap yarn around a hook or needle, you add a tiny amount of twist or take a tiny amount away, depending on the direction you wrap. The widely held view is that standard right-handed crochet, with its repeated yarn overs, tends to remove twist from S-plied yarn. Over a whole project, that can loosen the plies until they start to separate, which is when the hook catches one ply and not the others.
This is why some yarns are made specifically for crocheters with a Z-ply, and why many crochet threads are Z-twisted. The idea is that the crochet motion tightens a Z-plied yarn rather than loosening it.
It's not quite as simple as one rule for everyone, though. How you hold your hook, how you yarn over and whether you crochet right- or left-handed all change which direction you're adding twist. Hands-on tests by spinners have produced mixed results, and a yarn with a firm, high twist may barely notice the small amount of twist lost along the way. What's consistent is the principle: if a yarn keeps splitting as you work, twist is a likely culprit.
A few things you can try:
Let the yarn untwist or retwist as it needs to. Every so often, let your work or ball dangle so the yarn can spin freely and settle.
Choose a yarn with a firmer twist. Tightly plied yarns are less likely to separate, whichever direction they're plied.
Try a Z-plied yarn if you crochet a lot and splitting is a regular frustration.
Check your yarn over. Yarning over and yarning under add twist in opposite directions. Many crocheters find their yarn behaves differently with a small change of technique.
Use a hook with a rounded throat. A pointy, sharp-throated hook is more likely to slip between plies.
Twist Direction in Knitting
Knitting is affected by twist direction too, though most knitters notice it less. Different knitting styles wrap the yarn around the needle in different directions, so each can add or remove a little twist as you go. If you find your yarn twisting up into kinks or gradually untwisting as you knit, that's twist at work, and letting the ball spin freely every now and then will usually sort it out.
Some traditional techniques are built around twist direction. Twined knitting, a Scandinavian technique worked with two strands, adds a lot of S-twist as you knit, so it has traditionally been worked with Z-plied yarn to stop the yarn untwisting.
Twist and Biasing: Why Does My Knitting Slant?
If a yarn isn't balanced, the leftover twist energy has to go somewhere. In knitting and crochet, it often shows up as biasing, where the fabric slants diagonally rather than sitting square. It's most noticeable in stocking stitch and in singles yarns, since a singles yarn has twist in only one direction and nothing to balance it.
Biasing isn't a fault in the yarn. It's a natural characteristic of how some yarns are constructed, and it's easy to work with once you know to expect it:
Swatch and block your swatch to see whether a yarn biases and whether blocking settles it.
Choose stitch patterns that balance themselves. Garter stitch, seed (moss) stitch and ribbing distribute the twist evenly, so they rarely bias.
Work in the round with care. Biasing can be more visible in stocking stitch worked in the round, so a swatch in the round is worth the time.
Some designers use this deliberately. Yarns with a very high, unbalanced twist (sometimes called energised yarns) create crinkled, crepe-like or diagonal fabrics, and the bias becomes part of the design.

Twist Level: Soft and Lofty or Crisp and Durable
Direction is only half the picture. The amount of twist in a yarn, often described as twist level, shapes how it feels and wears.
Low-twist yarns have fewer turns along their length. They tend to be soft, lofty and warm, with a gentle, slightly fuzzy surface. They're lovely for cowls, shawls and anything worn close to the skin. Because the fibres aren't held as firmly, they're also more likely to pill with wear and friction.
High-twist yarns are twisted more tightly. They're smoother, stronger and more hardwearing, with crisp stitch definition that makes cables, lace and textured stitches stand out. That firmness makes them a good choice for socks and items that see heavy use, though they can feel a little less squishy in the hand.
Most yarns sit somewhere in the middle, and neither end of the scale is better than the other. It comes down to what you're making and how you want it to feel.
Twist in Weaving
Weavers have used twist direction for centuries. Because S-twist and Z-twist yarns reflect light differently, alternating them in the warp or weft can create subtle stripes and shadow effects without changing colour at all. Twist direction can also change how a twill line looks, making it appear crisper or softer depending on whether the twist runs with or against it. Warp yarns, which are under constant tension, usually need a firmer twist than weft yarns for strength.

Quick Questions About Yarn Twist
What is the difference between S-twist and Z-twist yarn?
They're twisted in opposite directions. S-twist slants like the middle of the letter S (anticlockwise), while Z-twist slants like the middle of the letter Z (clockwise).
Is most yarn S-twist or Z-twist?
Most commercial plied knitting yarns are spun Z and plied S, so the finished yarn shows an S-twist on the outside.
Is Z-twist yarn better for crochet?
Many crocheters find Z-plied yarn splits less, as the usual crochet motion is thought to tighten it. Results vary with hand and technique, so a firmly twisted yarn of either direction can work well too.
Why is my knitting slanting to one side?
That's usually biasing, caused by unbalanced twist in the yarn. It's most common with singles yarns in stocking stitch, and swatching, blocking or choosing a balanced stitch pattern usually helps.
Twist Is Part of a Yarn's Character
Twist is one of the details that gives each yarn its personality. It explains why one yarn glides through a crochet project while another splits, why a single spun yarn feels so soft and why some fabrics drape while others hold crisp, defined stitches. Once you know what to look for, a quick glance at the twist tells you a little more about how a yarn will behave before you even start.
If you'd like help choosing a yarn for a particular project, or you're not sure how a yarn will behave, we're always happy to help, whether online or in person at one of our markets. Browse our full range of yarn online. We ship directly from Canberra across Australia.
If you're a PlyPerks member, don't forget to log your purchases to earn points on every skein. Not yet a member? Joining is free.
We write our guides to help you make informed choices, not just inspired ones. If you have questions about yarn twist or any yarn we stock, we're always happy to help.




